"General technical conditions for children's furniture GB28007-2011" (hereinafter referred to as "new national standard") has been implemented for one and a half months, but when the reporter visited the Beijing market in mid-September, he found that many children including many love, I love my family, and more cute. The famous brand of furniture has turned a blind eye to the new national standard, and the exhibition hall is still filled with old products that are not in compliance. According to industry insiders, the regulatory gap in the new national standard for children's furniture is an important factor that causes manufacturers to slack off and openly violate regulations. Big brand sales of non-compliant products On August 1, the new national standard for children's furniture was officially implemented. This implementation of the mandatory standards for children's furniture, after the implementation of a month and a half, the reporter surveyed the Beijing home market, found that many favorite, I love my family, cute and many other famous children's furniture industry brands still regard the new national standard For nothing, the exhibition hall is filled with old products that are not in compliance. On September 15th, the reporter saw in the many favorite exhibition halls of Lan Jingli's Dazhongsi store. An obviously old bedside table was installed with a roller slide device. The reporter took a little effort and the drawer fell out. The new national standard stipulates that the drawer push-pull parts should have anti-pulling devices. Aijia Home West Fourth Ring store's many favorite showrooms are selling a large number of samples, and a product is equipped with a bright glass component, which violates the requirements of the new national standard for the use of glass components below 1.6 meters. Known as the "global children's furniture quality assured brand of choice", I love my family, and the emphasis on the new national standard is no better than love. In the blue Jingli family Dazhongsi shop, I love my home showroom, a large wardrobe only has a vent hole in it, and according to the new national standard, there should be two unobstructed ventilation openings in the confined space. In the home of the home of Jinyuan, I love my family, some of the products being sold are not even anti-dumping devices, and they are sung against the new national standard. The famous children's furniture brand in Beijing is so cute that it also does not comply with the new national standard. The new national standard stipulates that the product can be exposed to a dangerous outer angle of 1.6 meters or less, and the rounding radius is not less than 10 mm. However, in the lovely multi-show hall of Aijia Home West Fourth Ring Store, some bookcases and wardrobe corners are very distinct. Some of the movable parts of the store do not have any warning signs, nor do they meet the requirements of the new national standard. "On the products with folding or adjusting devices, warnings such as 'warning, careful pinching' should be marked." In addition to the basic protection measures are not well done, most of these brands are not able to produce test certificates in the first place in terms of the limit standards for harmful substances. I have just experienced the "contamination door" of formaldehyde, but I have shown the test report to reporters, but only the test results of four kinds of migratory elements are shown above, and the test standards of eight kinds of migratory elements are specified in the new national standard. The manufacturer’s pattern frequently appeared in the new national standard implementation of the weak reporter survey. Although many fans, I love my family, and many other children’s furniture brands are no strangers to the new national standard, the shopping guides can also say some standards, but when it comes to When it comes to some standard details, these shopping guides are beginning to make vague statements and justify them for various reasons. I like a hairdresser and a shopping guide. “The new national standard is only for small manufacturers, because big manufacturers meet the standards except for some details, so it is normal to sell old products normally.†She even said that the chamfer specified in the new national standard is No practical meaning, chamfering is only a psychological comfort. For the same question about why the old furniture was sold, I love my family manager at the West Fourth Ring Store. “This is entirely in response to the call of the store. Due to the approaching peak of the '11' passenger flow, if a large number of samples are advanced in advance Clearing away, the exhibition hall will appear chaotic, so that the overall sales environment will be affected, so we will not replace the new products for the time being, but we will clean up the old products after the '11'.†Compared with many love, I love my family, cute and more Sales manager Li Shengjie is more confident: "The new national standard is only slightly adjusted for individual places. The old products in the store do not hinder major events and will not affect customers." She also said that due to the new national standard August 1 this year The day before the launch, there are many old products in the company's warehouse, even if it is replaced, it has to be slowly, and the store has given them a certain buffer period. For the more lovely statement, the staff of the marketing department of Aijia Home West Fourth Ring Store said that the store does provide a buffer period for the manufacturers, but at the same time, the manufacturers are required to explain the situation to the consumers when selling the old products, and in the old products. A safety warning slogan is marked on it. In fact, when the reporter visited, there were no manufacturers to explain. There is a buffer period for the implementation of the new national standard. Luo Yi, one of the drafters of the new national standard for children's furniture and the deputy director of the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, denied: “Because the new national standard was not available before it was launched The manufacturer announced that after the release of the new national standard on August 1, the store must be implemented according to the new standard.†The new national standard for the supervision of the new national standard has been implemented for one and a half months, and the manufacturer is still informed about the new national standard. Selling old products that do not meet the new national standard in Daxie? As a colorful life involved in the formulation of the new national standard, Chen Long, the business manager of the brand department, broke the tactics from the perspective of the manufacturer. "The old products are not replaced in time, based on the consideration of the interests of the manufacturers and distributors. On the one hand, we can't ignore the life and death of the dealers, so give them some clearance time. On the other hand, as manufacturers, they also have their own difficulties, if they want to implement The new national standard will return all the old products to the factory, and the loss is huge.†He also believes that because some big brands are not completely inconsistent with the new national standard, before the new national standard is not popularized, it is better to let it sell in the market. A while, it also makes manufacturers and dealers less loss. “Industry's lack of supervision has given birth to the soil for the slack of the brand.†Song Guangsheng, director of the National Indoor Environmental and Indoor Environmental Product Quality Supervision and Inspection Center, believes that “on the surface, the new national standard has mandatory national standards, but due to participation in drafting Most of the units are jointly carried out by some enterprises to jointly cooperate with third-party testing institutions, and the truly leading industry associations have not really participated, resulting in the new national standard only identity, no greater influence, so the implementation of supervision will be greatly reduced. The insiders also revealed that the supervision of the new national standard itself is a difficult problem. The store introduces the factory into the store. The requirement for the manufacturer is to show the test report of the relevant department. The manufacturer only has the right to allow it to sell the booth at the store, but has no right to control its quality and impose penalties. The industry and commerce department is responsible for the supervision of the market, but for the specific products to meet the standards, special departments are required to conduct random inspections, and there is no law enforcement inspection for the implementation of the new national standard. The quality supervision department mainly conducts random inspections on harmful substances such as formaldehyde, and does not ask questions about corners, glass, warnings, etc. The institution that sets the new national standard is composed of enterprises and testing institutions, and has established standards, but has no power to supervise the implementation of standards. Chen Long pointed out that if the state supervision is very strict, I believe that there will not be so many brands that are lucky enough to violate the rules. At present, it seems that in the absence of supervision, it is mainly based on the consciousness of enterprises, no one punishes them for violations, and it is even more difficult for the offenders to pay the price. It is no wonder that many brands like, I love my family, cute and so on I tried the law.
we produce CaSi Cored Wire 5000mt/year
specification:A ca:30% si:60%min Al:1.5%max C:1%max S:0.05%max P:0.05%max
B ca:28% si:58%min Al:1.5%max C:1%max S:0.05%max P:0.05%max
DIa:13mm
Calcium Silicon Cored Wire, Silicon Calcium Barium Cored Wire,Calcium Silicon Alloy Cored Wire,Calcium Metal Cored Wire,CaSi Cored Wire,Ca Cored Wire
Shizuishan Ketong Metallurgy Industry And Trade Co., Ltd. , https://www.ketongmetallurgy.com