When wiping the furniture, do not use coarse cloth or old clothes that are no longer worn. When the cloth is used, it is best to use a water-absorbent fabric such as a towel, cotton cloth, cotton fabric or flannel cloth to clean the furniture. Old cloth, such as coarse cloth, wired head, or stitched, buttons, etc., which may cause scratches on the surface of furniture, should be avoided.
Do not wipe the dust on the furniture surface with a dry rag
Dust is made up of fiber, sand and bauxite. Many people are used to cleaning the surface of furniture with a dry rag. In fact, these fine particles have damaged the furniture finish in the rubbing of the back and forth. Although these scratches are minimal and even invisible to the naked eye, over time, the surface of the furniture will be dull and rough, and the light will not be.
Do not wash furniture with soap, detergent or water
Cleaning products such as soapy water and detergent can not only effectively remove the dust accumulated on the surface of the furniture, nor can remove the sand particles before the light is burned, and because they are corrosive, they will damage the surface of the furniture and make the paint of the furniture The face becomes dull. At the same time, if moisture penetrates into the wood, it will also cause mold or local deformation of the wood, reducing the service life. Nowadays, many furniture are made of fiberboard machine. If there is moisture infiltration, the first two years have not been completely evaporated because the additives such as formaldehyde have not completely evaporated. However, once the additive has evaporated, the moisture of the wet cloth will cause the furniture to become moldy. If the households with lower floors, the furniture at home may have a "mold" every year. I would also like to remind you that even if some furniture surfaces are made of piano paint, it can be properly scrubbed with water. Do not leave the wet cloth on the surface of the furniture for a long time to prevent moisture from penetrating into the wood.
Furniture care spray wax can not be used to clean and maintain the leather sofa
Many furniture care spray wax instructions can be used to maintain leather sofas, causing many housewives to make mistakes. The salesperson in the furniture store knows that the furniture care spray can only be used to spray the surface of wooden furniture and cannot be sprayed on the sofa. This is because the leather sofa is actually the skin of the animal. Once the wax is sprayed on it, the pores of the leather product will be blocked. Over time, the leather will age and shorten its service life. In addition, some people in order to make the furniture look more shiny, some wax products are directly applied to the furniture, or improper use, but will make the furniture surface have foggy spots.
1.Specification: Various size as
customer's requirements
2.Material:A6063,A6061,A3003 and other series alu
alloy
3.Suface treatment: anodizing ,polishing,turning ,power coating,mill finish etc
4.Design:OEM,ODM,or design by ourselves
5.Equipment: CNC ,extruding machine,cold drawn machine,heating
oven,straigtening machine,cutting machine
|
OD |
OD Tolerance |
ID Tolerance |
Roundness |
straightness |
Circular run-out |
|
φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
|
φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
6. STANDARD PACKING :Wooden case/carton
7. OPTIONAL PACKING: Polyfoam interleave inside, wooden case
Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at
sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus
7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai
Aluminum Alloy Extrusion Tube
Aluminum Alloy Extrusion Tube,Aluminum Extrusion Tube,Aluminium Extrusion Tube,Aluminium Alloy Extrusion Tube
Changzhou YiFei Machinery Co., Ltd. , http://www.yifeialu.com