Low speed is a stainless steel vacuum pump often encountered a problem that gives us the use of a certain amount of trouble, so to find out the reasons for the low speed stainless steel vacuum pump becomes more and more important, Next, we will introduce stainless steel vacuum pump speed is too low reason: stainless steel vacuum pump speed is too low. Reason 1, the human factor: a considerable number of users due to stainless steel vacuum pump original motor damage, free to drive coupled with another motor, resulting in 2, its own mechanical failure: the impeller and the pump shaft fastening nut loose or bending deformation of the shaft, resulting in more impeller movement, direct friction with the stainless steel vacuum pump, or bearing 3, belt wear: There are many from the stainless steel vacuum pump with a pass, due to long-term use, the belt wear and loose, there slippage, thereby reducing the stainless steel vacuum pump speed; 4, power machine Maintenance does not record: Motor burned due to winding, and loss of magnetism, maintenance 5, improper installation: two pulley center distance is too small or two axes are not parallel, the tight edge of the drive belt Installation to the above, resulting in the wrapping angle is too small, the two pulley diameter error calculation and coupling stainless steel vacuum pump shaft eccentricity larger, will result in stainless steel vacuum pump speed changes. About why the stainless steel vacuum pump will be low speed knowledge to everyone here, and only we really understand the stainless steel vacuum pump speed is too low, find a solution in time to be able to ensure its normal use. Further reading: Motor IFAT China's top ten brands Guangzhou Exhibition building water pump manufacturers ranking ptc Show article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor : Lindj (QQ / WeChat: 181817456) Starting: http://beng.liuti.cn/ (Service Hotline: 400-6030-811)
