In the vortex pump, if you want to extend its service life, it is very important to master the correct maintenance methods, then how to maintain the vortex pump? How to maintain the vortex pump 1, whirlpool Air pump bearings require regular maintenance, can add grease to the bearings to prevent bearing damage during operation. Bearing in operation, to ensure adequate smooth, reduce its degree of wear and tear, you can extend the service life of bearings. 2, the motor shaft power and pressure is proportional, when the motor load is too heavy, the pressure of the vortex pump will also increase. Therefore, in the motor to always use the pressure relief valve, the excess pressure released, so as to protect the motor, the motor can be used normally. 3, special parts require special maintenance, when the operator does not know how to maintain special parts, do not maintain and maintain special parts, let the professional maintenance staff of the special special vortex pump Parts for maintenance. 4, the vortex pump in operation, if the motor current is too large, it will directly affect the motor pressure and vacuum, therefore, in the vortex pump outlet to maximize the cross-sectional area of ​​the outlet to avoid causing the motor The current is too large. In addition, the maintenance of the vortex pump, for some parts also need to be disassembled, therefore, the operator to master the vortex pump installation method, so that the vortex pump after removal how to understand the correct installation. Extended reading: Top ten brands of motorcycles Canton Fair Central China Construction Water Exhibition Pump manufacturers ranked ptc exhibition industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat: 2355962924) http: //beng.liuti. cn / (Service Hotline: 400-6030-811)
