Overview Fluorine plastic alloy is the world's best corrosion-resistant materials, I choose the unit produced by the FSB, FSB-D series of pumps, has a strong corrosion resistance, and high mechanical strength, non-aging, toxin-free, It can be widely used in chemical, petroleum, pharmaceutical, pesticide, smelting, dye, papermaking, electroplating, foodstuffs and other industries by delivering any concentration of acid, lye, oxidizer and other corrosive materials. 1-pump body 2-impeller 3-back cover 4-gland 5-seal 6 bracket 7 pump shaft 8 oil cover 9 oil mirror 10 bearing 11 bearing gland 12 coupling 13 hanging FSB Fluoroplastics Alloy Pump Structure Description: FSB Fluoroplastics alloy pump consists of pump body, impeller, back cover, seal, bracket, pump shaft, bearing, coupling, lifting bolt, nut and bottom plate. 1 pump body: left and right sides of the connection part of the embedded steel flange ring made of a molded plastic alloy. 2 on the right side of the back cover buried stainless steel (1Cr18Ni9Ti) molded plastic alloy. 3 impeller: the connection method using the shaft, the metal shaft for the high-quality steel finishing plastic molded outsourcing, the impeller and the metal shaft firmly bonded together to ensure that the rear axle and the impeller with the rotation of the torque to withstand , So wet part of the medium plastic alloy. 4 mechanical seal: WB2 type, ST type without cooling water adjustable face seal technology, made of silicon carbide, high purity alumina ceramic, filled PTFE, graphite and other materials. Zeus pump related articles Read: Corrosion-resistant wear-resistant plastic pump scope UHB-UF Series Corrosion-resistant wear-resistant plastic pump Introduction
