Deep well pump working principle introduced

The working principle of deep well pump is the vane pump to lift water from the well. The long shaft deep well pump is a kind of pump which is widely used in deep well pumps and is generally used for machine wells. Deep well pump is mainly composed of three parts: the top is the motor, installed in the middle of the wellhead is the working part of the water pipe and drive shaft at the bottom of the deep well pump submerged in the well below the surface water. Due to the well depth, the larger head is required. The lift range of the long shaft deep well pump is generally 15-17 m. Deep well pump can be divided into multi-stage vertical centrifugal pump. According to the structural characteristics of deep well pumps, the correct use and timely troubleshooting can ensure the safe operation of deep well pumps and prolong their service life. Deep well pump pump, suction pipe and pump must be filled with liquid. After the pump is turned on, the impeller rotates at a high speed and the liquid rotates along with the blades. Under the action of centrifugal force, the liquid will fly out of the impeller and the liquid will gradually become slower in the diffusion chamber of the pump housing, and the pressure gradually increases. Export, discharge pipe outflow. At this time, at the center of the vane, the liquid is thrown around to form a vacuum low-pressure area free of air and liquid, and the liquid in the liquid pool flows into the pump through the suction pipe by the atmospheric pressure of the pool surface, Continuously sucked up from the liquid pool and continuously from the discharge pipe outflow. Zeus pump related articles Read: Peristaltic pump handling and installation Cement mortar pump application Performance characteristics of concrete pump