First, the centrifugal pump classification According to the nature of the liquid being transported can be divided into: (1) The pump is used to transport clean water and physical, chemical properties similar to water, clean liquid. (2) corrosion-resistant pump used to transport acid, alkali and other corrosive liquids. (3) The pump is used to transport petroleum products. Second, the choice of centrifugal pump (1) according to the nature of the liquid being transported and operating conditions to determine the type; (2) according to the flow (usually by the production tasks) and calculate the pressure head required in the pipeline to determine the pump model Or product catalog); (3) If the viscosity and density of the liquid to be transported differ greatly from that of water, the characteristic parameters of the pump should be calculated: flow rate, pressure head and shaft power. When choosing a centrifugal pump, there may be several types of pumps that meet the requirements of operating in the optimum range at the same time. In this case, you can determine the operating points of each pump, compare the efficiency of the operating point, the preferred choice. Centrifugal pump is characterized by liquid delivery capacity, uniform flow, but the resulting pressure is not high, and the pressure head with the flow changes.
