>>>Cleaning and maintenance of vitrified tiles
The vitrified tiles are made of quartz sand and mud in a certain proportion, and then polished, the surface is smooth and translucent like a glass mirror, and it is the hardest one in all tiles, in terms of water absorption, edge straightness and bending strength. , acid and alkali resistance are better than ordinary glazed tiles and general marble. Large-format glass tiles have become the mainstream of home decoration, and are widely used in living rooms, foyers, and other places.
Vitrified bricks have become a decorative mainstream as wall tiles. At present, there are two kinds of paving techniques for wall decoration made of vitrified tiles. One is the dry hanging method, and the other is the cement mortar paving method. In terms of home decoration, the use of cement mortar paving is much more. Put on the use of cement mortar in the wall tile glass tiles to introduce, in the paving process, the need to pay attention to the main problems?
The main issues that need attention are the following:
1. Inspection of the base of the wall. The first thing to look for is whether the original wall is suitable for paving ceramic tiles. For example, if there is hollowing or cracking on the wall surface, and whether the wall is waterproof or unqualified, if these problems exist, If you do, you will need to rectify and then tile. (This is a point that needs attention for both tiles and tiles.)
2. The fixing of the bottom floor tiles. When the ceramic tile is tiled, when the walls begin to be tiled with vitrified tiles, it is necessary to determine the level of the tiles. The glass tiles that will be used for paving will be fixed and supported with wood, etc. Falling tiles.
3, when paving, the content of cement mortar can be slightly larger than the ordinary wall tiles, the cement consultation is slightly higher, you can add glue at 1:2, cement mortar to increase the adhesion of the tile.
4. The cement mortar on the back of the vitrified tiles shall be evenly coated to prevent hollowing of the tiles.
5. When paving, it is recommended not to put a wall on the wall of a paving, the entire space can be layered layer of paving, a wall of a wall of paving, mainly to avoid the cement mortar setting time, so that the ceramic tile If you fall and lap upwards, the time for condensation will be more adequate and the tiles will be easier to fix.
6, when the tile is paved, do a good job in the protection of related items, such as doors and windows, to prevent damage, and timely clean the cement mortar squeezed out of the brick joints, and then after the tile dry solidification process.
7, after the tile is finished, need to check the quality of the wall shop, whether there is empty drums and other issues.
8, in the later installation process, if it comes to wall drilling, you need to pay attention to the intensity of the same time, while using the impact drill hole when punching the edge of the hole to the water spray to prevent the tile in the instant temperature Rapid changes lead to cracking of the tiles (the lid of the beverage bottle can be filled with nails, emptyed, filled with water, squeezed when punched, and filled with water).
Some misunderstandings of vitrified tiles need to be clarified:
Vitrified bricks do not need to be soaked in water
Because the water absorption rate of vitrified tiles is less than 0.5%, it is basically equivalent to no water absorption, so there is no difference between soaking water and soaking water! When paving tiles, do not need to soak, directly paving!
Vitrified bricks leave black marks with ink experiments. Is it normal?
With regard to the antifouling performance of ceramic tiles, there is no mandatory requirement for the country at the moment. At the same time, the ink is a stubborn stain. Many glass tiles will have such problems. The following suggestions are proposed for this issue:
1, when buying, if the residual stain is as little as possible.
2, you can consider the selection of ultra-bright series of vitrified tiles, this tile is a layer of nano-pollution layer added to the brick surface, can completely solve the anti-fouling problem of tiles.
Tiles Tiling Tiles Decorations Companies Cement Decking Glass Decorating of windows Decorating of living room Marble tiles Glass bricks Glass doors Glass tiles Glass tile Tiles Acid-resistant tiles
Ultra-Thin Ball Valve,Industrial Ultra-Thin Ball Valve,Thread Globe Valves,Threaded Swing Check Valve
ZHITONG PIPE VALVE TECHNOLOGY CO.,LTD , https://www.ztongvalve.com