Several steps of planing the face of the cast iron flat pen are introduced in the steps of the straight face of the planed cast iron flat pen.
Swing the table and the tool holder by hand to determine the depth of the infeed. For the convenience of operation, the cast iron plate processing appearance is usually placed on the right side, and the left partial knife is used for planing.
After manually using a straight pen to test the planer 1~2mm, the parking scale is measured to see if the depth of the knife is appropriate.
After the entire surface of the cast iron plate is transported, the parking is carried out, and the tool holder is lifted to the starting position. Use a square to check whether the processed surface can be straight with the adjacent surface. If it is straight, continue to plan to stop. When cutting the final knives into the cast iron plate, the feed should be smaller to avoid the margin of the cast iron plate. This news website is: http://
Http://news.chinawj.com.cn
Submission:
Water-Based Fire Extinguisher,Pure Plant Fire Extinguisher,Wheeled Fire Extinguisher,Security Fire Extinguisher
Ningxia Wanhui Import & Export CO.,LTD , http://www.whfireextinguisher.com