| Home>Bearing knowledge>Guidelines and general requirements for bearing packaging |
Bearing packaging guidelines and general requirements
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The inner packaging of the bearing is divided into three categories according to the anti-rust period:
1 Short anti-rust period packaging: anti-rust period 3 to 6 months; suitable for large-volume delivery to the same subscriber; bearing put into use in a short period of time. After two sides agreement; easy to use as a guideline; use simple packaging.
2 usually rust-proof period packaging: rust-proof period of one year; suitable for the bearing of common use.
3 long anti-rust period packaging: anti-rust period of two years; suitable for special and fine bearings.
Bearing inner packaging materials include polyethylene plastic tube (box), kraft paper, plain and crepe polyethylene composite paper, carton, polyethylene or polyethylene plastic film, nylon fastening tape or plastic fastening tape, waterproof high-strength plastic tape , linen bags, etc. The above information must be ensured that the corrosion resistance function of the data is qualified.
Guidelines for bearing inner packaging methods:
1 miniature bearing: every 10 to 15 sets of bearings are loaded into a plastic cylinder; every 5 to 10 plastic cylinders are packed into a carton (or bag, roll).
2 medium and small bearings:
Multiple sets of bearings are wrapped with polyethylene film, external kraft paper or polyethylene composite paper;
Multiple sets of bearings are loaded into a plastic cylinder (box);
Single set of bearings are packed in polyethylene film bags; fold or seal the mouth of the bag and then load a carton.
3 large bearings:
Packed in a single set of polyethylene film or polyethylene composite paper; then loaded into a carton;
Use polyethylene film bag; single set of folded bag mouth; then put into a carton;
Single set into a special plastic box;
Single set of three-layer wrapped package: polyethylene film tape or composite paper tape for inner layer; fastening tape for middle layer; waterproof and saturated plastic tape for outer layer.
4 extra large bearings:
Single set of three-layer wrapped package (same as above);
Single-layer four-layer wrapped package: wrapped in the above three layers wrapped; the outermost layer is wrapped in a layer of linen tape.
For separable tapered roller bearings with an outer diameter of ≥150mm; the polyethylene film should be placed before the inner and outer components before packaging; or the inner and outer components should be separated and packaged separately.
For exchangeable cylindrical roller bearings with an outer diameter of ≥150mm; it is simply scratched by the package; it can usually be separated and packaged separately by the components inside the watch.
The usual information and requirements for bearing outer packaging are as follows:
1 double corrugated box; the total weight (gross weight) of each box does not exceed 25kg; the outside of the box is bundled with plastic strapping;
2 nail box (wooden box); the total weight of each box does not exceed 30kg; the outside of the box is bundled with blue steel belt;
3 calcium plastic corrugated box; the total weight of each box does not exceed 25kg; the box loves to be strapped with plastic strapping.
When the bearing product with inner packaging is put into the box; the plastic bag or plastic film should be padded inside the box; if there is empty space in the box; it should be filled with dry materials such as corrugated paper and paper scraps.
Recommend to friends comments close window
| Bearing related knowledge |
| NTN bearing inner packaging method and data requirements pulping and papermaking bearing scale rolling bearing combination description should be considered when the bearing steel trademark indicates the method of classification and series analysis of imported bearings |
This article links to http://
Please indicate the bearing network http://
Previous:Coating anti-rust oil to avoid rust of SKF imported bearings Next: Noise characteristics and countermeasures of motor bearings
Terpenes are a large and diverse class of organic compounds, produced by a variety of plants, particularly conifers,though also by some insects
such as termites or swallowtail butterflies, which emit terpenes from their osmeteria. They are often strong-smelling. They may protect the plants
that produce them by deterring herbivores and by attracting predators and parasites of herbivores.
Terpenes are useful active ingredients as part of natural agricultural pesticides. Terpenes are used by termites of the Nasutitermitinae family to
ward off predatory insects, through the use of a specialized mechanism called a fontanellar gun. Higher amounts of terpenes are released by trees
in warmer weather.
We provide Ocimene,Myrcene,γ-terpinene,gamma-terpinene
,D-limonene,Linalool,Citral,α- pinene,β- pinene
,Phellandrene,Eugenol,Cineole,P-Cymene,Cedrene,Camphene,Terpinolene ,Beta
Caryophyllene,Anethole,Nerol,Carvacrol,Methyl eugenol,Isoeugenol,Eugenol,etc.
Our package is 1kg,5kgs,10kgs,25kgs,170kgs/175kgs in a drum
Please contact us for more details.
Natural Terpenes
Natural Terpenes,Natural Alpha Cedrene,Natural Fenchyl Alcohol,Natural Cineole Oil
Jiangxi Global Natural Spice Co., Ltd. , http://www.chessentialoil.com