When it comes to decorating a modern and stylish bathroom, wallpaper can be a great decorative element. However, applying wallpaper correctly requires following five important principles. These steps are essential to ensure the final result looks clean, lasts longer, and maintains its aesthetic appeal.
First, proper surface preparation is crucial. Before applying wallpaper, the base layer—usually the wall—needs to be thoroughly cleaned. Remove any dust, oil, or debris to create a smooth and stable surface for the wallpaper to adhere to. A clean base ensures better adhesion and prevents future peeling or bubbling.
Second, before pasting the wallpaper, it's important to mark the elastic lines on the wall. These lines serve as a guide, helping you align the wallpaper straight and evenly. By creating horizontal and vertical reference lines, you ensure that the wallpaper is placed correctly, avoiding any crooked or uneven appearance.
Third, cutting the paper is an essential step in the process. After measuring the height of the wall from top to bottom, cut the wallpaper slightly longer than the actual size—about 10-20 mm extra. This allows for small adjustments during application. Before pasting, the wallpaper should be soaked in clean water for a few minutes. This softens the material, making it easier to handle and apply smoothly without wrinkles or bubbles.
Fourth, applying the glue is one of the most critical parts of the process. Both the back of the wallpaper and the wall should be evenly coated with adhesive. Make sure the glue is spread uniformly, covering every part without missing spots. Avoid over-applying or piling up the glue, as this can cause stains or damage to the wallpaper. Also, when brushing the wall, leave about 30 mm more space on each side than the width of the wallpaper to ensure full coverage and strong adhesion.
Fifth, the placement of the wallpaper follows a specific order. Start by aligning the first strip vertically, then work horizontally. Begin from the top and move downward, and start with the highest point before moving to lower areas. This method helps maintain even alignment and avoids misalignment issues that can occur if the process is done haphazardly.
Heilongjiang Junhe Building Materials Technology Co., Ltd , https://www.junhejiancai.com