Many people don't know what the accessories contain, so let's get used to it today. In fact, the auxiliary materials can be roughly divided into four categories according to their uses. These include hydropower hardware, that is, various string pipes, down pipes and matching pipe fittings; woodworking hardware, which mainly includes various types of nails, hinges, slide rails, etc.; paint accessories, mainly including talcum powder, cooked rubber powder, gypsum powder, etc.; Various adhesives mainly include white glue, silica gel and the like. “Renovation accessories are the basis of decoration, and its importance is self-evident. Only by laying a good foundation can it be added to the icing. If the cement mortar used for decoration is not correct, or the quality is not enough, it will directly affect the paving of floor tiles and wall tiles. Even if it is not used for a long time, there will be a phenomenon of brick falling. In addition, when making a waterproof project for concealed works, the choice of waterproof material directly affects the quality after decoration. Although it may not appear immediately after renovation. However, after a period of use, if the quality of the waterproof material is not enough, it is likely that there will be leakage and affect normal life. If it is serious, it needs to be re-waterproof.
In fact, the choice of accessories in the decoration process is also a matter of learning. Such as the simplest putty, paint, paint and various glues, although these things do not look conspicuous, but they contain enormous energy, which is also a factor that cannot be ignored in the decoration.
In the process of home decoration, it is often the various glues, especially the grouting agent. It is suitable for tile gaps, floor gaps, etc. And it can be roughly divided into sand grouting agent and sandless grouting agent. Sand grouting agent is suitable for slit widths of 1 to 12 mm or even wider. Good grouting agent is not only firm and beautiful, but also has good waterproof performance, and it can make up for the flaws in some waterproof layers. The sand-free grouting agent is suitable for slit widths of about 1 mm to 10 mm, and the particles are small. If the slit width is relatively large, cracking is likely to occur. Therefore, you should still choose those that are more delicate and not easy to fall off.
In addition, when choosing a waterproof coating, it is also very particular. The most used place for waterproof coatings is the bathroom and the kitchen. The waterproof layer must have a certain thickness, and the amount of materials used will be relatively large. Therefore, when selecting, it is necessary to select a non-tar type waterproof coating which is stable in quality, less polluted, and has good adhesion.
Shengzhou Synthetic Chemical Industry Co., Ltd.: http://
Brief introduction
|
Material : |
Stellite –Grade 3.6.12 ,upon request |
|
Process : |
Powder Metallurgy , it is short for PM and investment casting |
|
Hardness: |
38-55 HRC |
|
Density : |
8.4 g/cm ³ |
|
Size : |
Diameter 8-500mm ,length 5-600mm |
|
Properties : |
Wear and corrosion resistance, high temperature resistance |
|
Application : |
as a Seal Ring |
|
Tolerance control : |
turning or grinding surface , tolerance upon drawing |
|
Production lead time |
Samples 15days , normal order 20-30 days |
|
Production capacity : |
10,000pcs one month. |
|
Package : |
carton or wooden case , pallet for export |
Application :
The seat are used to be pump or valves, some pump for oil and gas equipment, butterfly valves and some other equipment.
The seat could be used in many industries When you need the parts with wear resistance, corrosion resistance and high temperature at same time,
We guarantee the high precision size and straight tolerance control
Seal Ring,Butterfly Valve Seal Ring,Round Butterfly Valve Seal Ring,Cobalt Alloy
Shenyang Top New Material Co., Ltd. , http://www.topcobalt.com