1. Master the time. In general, quilts are exposed to light in the sun for a short time, and the cotton fibers will swell. For example, in the winter, it is enough to dry at 11 o'clock in the morning for only 3 hours. It takes only two hours to dry in the other three seasons. Because the time is longer, the cotton fiber will not swell any more, so there is no need to expose it. In addition, it is best to dry the sun for about 1 hour, which is to let the quilt fully dry.
2. The quilt made of different materials has different drying methods. The chemical fiber fabric is used as the quilt of the quilt and the quilt. It is not suitable to be exposed to sunlight in the sun to prevent the temperature from being too high to smear the chemical fiber. When drying, the quilt can be covered with a layer of cloth to prevent direct sunlight exposure. The duvet has excellent moisture absorption and moisture wicking properties and does not require frequent drying. If you are drying in the outdoors, you should also cover a piece of cloth, after 1 hour of "ventilation", you can also dry in the shade for 1 hour.
3. Never beat. Many people like to slap the quilt, thinking that this can remove the dust in the quilt, but it is not, because the cotton fiber is thick and short, brittle, tapping the quilt will break the cotton fiber into cotton dust. If the quilt is dusty, brush it with a brush.
PFMOLD`s focus is on designing and manufacturing plastic injection molds, requiring close tolerance machining using
advanced CNC milling techniques,lathes, EDM equipment, precision grinding and polishing and the exceptional skills and creativity of our team of qualified mold-makers.
We build Production molds ranging from low-run production molds to high-run production molds of class 101 standards. We use P20,718H,NAK80,H13,S136,1.2344 and other Stainless Steel to achieve the tooling you need and the quality and life expectancy you would expect from a production mold. We offer cold sprue, hot sprue, hot tip and valve gate options for
gating. We can build the manifold system or purchase a complete hot half from a supplier of your choice; Single cavity,
multi-cavity or even family production molds. We also offer texturing and mirror polishing. Average delivery time is two to
six weeks for all production molds.
We build:
Single shot plastic injection molds
Insert plastic injection molds
Unscrewing plastic injection molds
Carbon fiber plastic injection molds
Multi-shot plastic injection molds
complex actions plastic injection molds
collapsible cores plastic injection molds
Rotary plastic injection molds
hot manifold plastic injection molds
silicone plastic injection molds
Over plastic injection molds
In-mold decorating molds(IMD)
In-mold labeling molds(IML)
Gas assist plastic injection molds
Stack plastic injection molds
Robotics and Automation plastic injection molds
Horizontal plastic injection molds
Vertical plastic injection molds
We service demanding high precision customers such as:
Medical
Hydraulics
Defense
Optics
Aerospace
Consumer
Electronics
Transportation
Industry
Our Process
Our process can be summarized in a few basic steps:
Assessment of your need.
Recommendation and proposal.
Agreement.
Design of your mold with multiple consultations.
Transfer of design specs to machining software.
Creation of mold.
Prototyping parts and your inspection.
Approval.
Delivery of mold.
Injection Molding Machine,Blow Molding Machine,Preform Mould,Car Grille Mould
PF Mold Co., Ltd. , http://www.pf-mold.com