Try to fix the tiles with empty drums and cracks.

In the years and daily use, the tiles are prone to cracking, hollowing or falling off. It is obviously not practical to replace the wall tiles in large quantities. How to solve these small problems?

First of all, the corners are hollow: If there is an empty drum on the edge of the tile, the part of the edge of the tile can be watered, the gap between the tiles can be opened with a small shovel, and then the cement is poured into the gap, the empty place It will automatically suck in until the filling is completed and the whole is replaced.

Secondly, the local empty drum: a small amount of local hollow drums on the wall of the wall, can not be treated without affecting the installation of furniture, such as cabinets, mirror cabinets, showers and water heaters, but if it is for installation and daily life For the impact, it is recommended to knock out this partial tile and re-paste it.

Third, 2/3 area empty drum: It is recommended to remove it and re-lay it. At this time, it is especially important to apply the adhesive. The single tile is stuck on a flat surface. You can use tile adhesive or tile adhesive. If it is a small area. For a range of tiles, it is recommended to use beneficial clay more than cement.

Fourth, the crack: can be filled with ceramic tile to repair the obvious crack, to cover up the cover. (Source: New Culture News)

Active Ingredient:     Quaternary ammonium salt cationic surfactant 
Chemical Name:       Formaldehyde-free Fixing Agent  
Chemical Family:     PolyDADMAC

CAS No.:                   26062-79-3  

1.Formaldehyde-free Fixing Agent 

2.Has no free formaldehyde,no peculiar smell,no irritation to skin, accord to eco request  

[Description]:

        Formaldehyde-free Fixative Color Fixing Agent is belongs to polymerization polyDADMAC, a cationic polymer. It can make up of macromolecular compound with dye, then achieve to improve soaping and rub fastness of fabrics. It can be used for color fixing for dyeing and printing of reactive dyed fabrics as cotton, linen, silk, and direct dyed fabrics.

[Specification]:

              Appearance:  Brownish yellow viscous liquid

              Ionic character:  Cationic

              PH Value:  5-8 (1% aqueous solution)

              Dissolution:  Dissolve in cold water easily.

              Composition: Special polymer compound

[Dilution Method]:

With 4-6 times the water and stir to dissolve dilution.

[Direction for Usage]:(To dilute finished product as an example)

A. Padding Process: 5-20g/L, temperature 40°C-60°C, PH Value:5-8, One-dip-one-nip or Double-dip-double-nip.

B. Dipping process: 1-4% (O.W.F), Room temperature 40°C-60°C, PH Value:5-8, bath ratio:1:8-12,Time: 20-30 min.

[Properties]:

1. Concentrated Formaldehyde-free Fixative Fixing Agent has good color fixing property, can obviously improve the dyeing or printing of fabric soaping, washing fastness and wet rubbing fastness.

2. Can be used for much of the association between dye fixation, anti fading property, does not affect the dyeing or printing of fabric vividness. No effect for the original feel, processing fabric has excellent hydrophilic.

3. Formaldehyde-free Fixative  widely used for dyeing or printing of the direct, active dye fixing finishing, good fixation effect, especially for the red dye and Cuilan dyes, particularly prominent, fixation is better than the general Formaldehyde-free Fixative.

4. The dye PH value for a wide range, acid, alkali resistance, resistance to hard water, high temperature resistance, an environment-friendly products, does not contain formaldehyde.

Textile Chemicals

Textile Chemicals,Decolorizing Agent,Textile Fixing Agent,Dye-Fixing Agent For Textile

Shandong Tiancheng Chemical Co., Ltd. , https://www.tianchengchemical.com