When it comes to tiles, I believe everyone is not unfamiliar. Tiles are currently the most commonly used decoration materials in home improvement, but also the necessary decoration materials for kitchen and bathroom. However, tiling is a technical activity. In the case of bad tiles, it is prone to hollowing; if the tile is not well done on the wall, bricks are likely to appear. So, what are the precautions for tiling ? Let's learn about it with me!
Tile Precautions - Laying of Wall Tiles
1. When carrying out the grass-roots level treatment, the dirt on the wall should be cleared in time, and the wall should be watered and moistened one day in advance. If the grass-roots wall is the heart, wait until the cement mortar is 70% dry, you can row, brick, sticky towel wall tiles and other processes.
2, before tiling, must be soaked in water for more than 2h, bricks do not bubble prevail, take out and dry, and stand by.
3, when tiling, encountered in the support of pipelines, bathroom equipment, must require the use of a whole block of bricks cut anastomosis, do not use non-whole brick patchwork paste.
Tile Precautions - Laying of Floor Tiles
1. Tiles must be immersed in water for a long time before they are used. Bricks do not bubble.
2. Kitchens and bathrooms should have a water gradient to avoid the phenomenon of water accumulation in the future. If the waterproof layer is inadvertently damaged during construction, it must be re-waterproofed. There is no leakage during the 12-hour test.
3. After the floor tiles are laid, they must be covered with cardboard, at least after 24 hours, to walk on the tiles.
Tile Precautions - After Tiled
After 1 hour of laying the tiles, the dirt left on the tiles should be wiped off immediately. For example, after the grout is attached for 4 h, it is relatively difficult to clean it. After the tile is tiled for 12 hours, check the brick surface. If any empty drums are found, resurface the tile.
Tiling four details to pay attention
1, for the decoration of experienced construction workers, sealant is generally wiped with a finger. Because the brushes are too soft, the sealant is difficult to fill completely.
2. The balcony should be tiled, so thick mud should be brushed on the original outer wall, which will make the tiles more secure. If you do not brush, the tiles can be affixed to them, but they will easily fall off in the future.
3. Since the wall tiles are easy to crack, it is also a technical activity to drill holes in the tiles.
4. If the wooden wall is to be tiled, it is recommended to fix the barbed wire on the wooden board. The purpose is to enhance the adhesion of the tiles.
Editor's summary: The above is about the introduction of ceramic tile notices , and we hope to help friends who have this need! For more information, please continue to pay attention to our website, follow-up will show more exciting content for everyone.
Tile Precautions
Angle valve
Angle valve used in every place if need install faucets. It is a fitting, which connect between water plumbing and faucet`s flexible hose. Most of these made of Brass and chrome finished. Some made of stainless steel. Ceramic cartridge, quality can guarantee ten years no leakage water and no rusty.
Angle Valves,Brass Angle Valve,Angle Seat Valve,Angle Globe Valve
SHENZHEN KING OF SUN INDUSTRY CO.,LTD , https://www.handyfaucets.com