In order to build a well-to-do society, the country is very focused on the transformation of rural construction. For some old house renovations, the state also gives appropriate policy compensation. However, many people are not very familiar with the compensation policy for old home renovations . What are the old home renovation standards are not very clear. The following is a small series to explain to everyone in detail the old house transformation compensation policy and the old house transformation standards.
Old house reconstruction compensation policy
1. What are the compensation policies for old house renovation? Actually, this is based on different regions, different economies, and different development situations. The compensation policy for old house renovation is also different. Xiao Bian is explaining the compensation policy for the transformation of an old house in a rural area and is for reference only.
2. If the nature of the residential land in rural areas was to change beforehand, an application must be submitted to the village (neighborhood) committee, and then approved by the sub-district office. After review by the city's land and resources bureau, it will be reported to the municipal government for collective construction. Land transfer approval procedures are good.
3. According to the relevant national policies, the legal residential building covers an area of ​​1:1 for resettlement compensation. The area within the demolition of the house's ceiling must be subject to approval procedures in accordance with the relevant regulations for rural private houses. If there is a section that exceeds the maximum limit, the land must be sold in a state-owned land transfer manner in accordance with relevant regulations.
4. If the occupied area of ​​the old building has been changed according to the plan, the excess area of ​​the building will be more than a quarter of the total area, and it can be planned in half. If the excess area is greater than three-fourths of the plan, it can be counted. These land occupations for buildings with multiple rows can be supplied to the land in the form of transfer of state-owned land use rights, and the demolished persons receive state-owned land transfer fees according to the triple standard of the current benchmark land price.
5. For the compensation for the old house renovation, the previous courtyard area can be charged at a quarter of the current benchmark land price. If it exceeds the area of ​​the previous courtyard, the land transfer fee shall be charged at 50% of the current benchmark land price.
Old house renovation standards
1. In order to ensure rural residential safety, the state has certain identification criteria for the renovation of some dilapidated buildings. This standard will be specially formulated.
2. For some dilapidated housing standards, it can be applied to houses managed by the real estate management department. For the self-owned or privately-owned houses, the identification criteria can refer to this standard. However, it should be noted that this standard is not suitable for public buildings, industrial buildings, heritage buildings and high-rise buildings.
3. The components referred to in the retrofitting standard for existing buildings refer to load-bearing components, and the structure referred to refers to the system composed of load-bearing components.
4. When the old house is remodeled, it must be tested and checked for some complex structures or very important houses.
5. Because there are many factors in the constitution of a dilapidated house, real estate management departments in various places may also formulate implementation rules or supplementary regulations when implementing this standard.
The article concludes: The above content is the explanation of Xiaobian’s compensation policy for the old house renovation and the standard for the renovation of the old house. After understanding the above, I believe that everyone’s compensation for the old house reform is more clear. If you also want to understand the specific compensation policy for old house renovation, you can also consult with the local demolition department.
Our product range is designed using superior quality raw materials and advanced technology in accordance with the international quality standards. the feed pipe, hot water pipe, water pipe; liquid food in the food industry pipeline.
ASTM Butt Welding Welded Steel Tee Bw Equal Reducing
Production Name: Stainless Equal TeeMaterial: Stainless Steel ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W,WP-WX, 304, 304L, 316, 316L, 304/304L, DIN1.4301, DIN1.4306, DIN1.4401, DIN1.4404
Dimension: ANSI B16.9, ANSI B16.28, MSS-SP-43 Type-A, MSS-SP-43 Type B, JIS B2312, JIS B2313
Thickness: 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.
Size Range: 1/2"80"
Application: Petroleum industry, Refinery Company, fertilizer industry, power station, shipbuilding, onshore platform and etc.
Inspection: Factory in house or Third Party inspection
Package: Plywood pallet or as customers' requsted
Reducing Tee,En10253-2 Fitting,Pipe Fitting Tee,16Mo3 Fitting, Barred Tee, Equal Tee, Tee Reducing, High Pressure Tee, Hot Formed Tee
Shijiazhuang Bang dong Pipeline Technology Co,Ltd. , https://www.bd-pipefitting.com