The MPS moisture-proof system allows the building structure with capillary holes (such as concrete and masonry) to dry completely. It can be applied to new and existing building structures to keep buildings (such as hydropower projects, basements and tunnels) that have been plagued and invaded for a long time in a permanent dry state and thoroughly solve the leakage. The problem is to keep the structure dry forever.
The MPS moisture-proof system requires very low power (about 10 watts, the Oswego civilian MPS moisture-proof dehumidification system has a power of 14 watts), only a few amps, and the required current as the water in the structure is reduced and dried. The intensity will gradually decrease and decrease. The whole drying process usually takes 1 month. In special cases, it takes up to 3 months. The sea water is dried faster than fresh water.
Advantages of MPS moisture-proof dehumidification system technology:
1. MPS moisture-proof dehumidification system provides permanent waterproof, anti-seepage and moisture-proof solutions, with low comprehensive cost and high efficiency; if micro-osmotic condensation penetrates from the pores of the structure, the crack repair measures are easy to implement after using the MPS system, and Very effective; for new projects, high-grade waterproof and anti-seepage, and other waterproof materials, such as waterproof coils and coatings, are not required, which saves waterproof materials and installation time, and can significantly save engineering costs;
2, the complex alkali process is simple, as long as the complex alkali solution is sprayed on the anode surface, it can be sent into the concrete body. The speed is fast, usually it can be completed in ten days. The special complex alkali electrolyte has been made in China and the price is moderate.
3, MPS moisture-proof dehumidification system is flexible and convenient to install, can be installed directly on the exposed side of the underground structure, without the need for expensive external excavation of the underground structure; Osmond MPS moisture-proof system can do the same day of installation on the same day With the use, the entire installation process takes only a few hours.
4, MPS moisture-proof system can prevent and protect the surface of the structure of paint peeling, mold and decay odor; the system prevents structural weathering and aging;
5, MPS system uses ultra-low voltage system, the lowest operating cost, 300 square meters of area requires only 14 watts equivalent to the power consumption of a light bulb.
6. The MPS moisture-proof system is safe and reliable, and the human body can be exposed without any electric shock hazard;
7. The MPS moisture-proof system does not have any destructive side effects on the structure, and does not affect the material composition of the structure;
8. The MPS moisture-proof system reduces the relative humidity in the underground structure, prevents the mechanical, electrical equipment and other items from being wet and corroded; improves and improves the insulation and insulation performance of the underground structure;
9. The MPS moisture-proof dehumidification system prevents bacteria from entering toxic groundwater or water.
TR' Functional Spray Paint are great used to industry and agriculture application and our daily life as well.
There are kinds of TR' Functional Spray Paint 's type: Rubber Spray Paint, Epoxy Paint , Glass Paint , Metal Paint ,Galvanized Paint,Epoxy Coating etc.
Functional Spray Paint
Functional Spray Paint ,Rust Paint,Chrome Paint,Heat Resistant Paint,Rubber Spray Paint,Epoxy Paint,Glass Paint,Metal Paint,Galvanized Paint,Epoxy Coating
Ding Wei Paint Technology. CO,ltd , http://www.toprankchemical.com