The water circuit of the bathroom decoration is arranged in a ring, and the new decoration pays more attention to the living room, bedroom, etc., leaving less in the bathroom. In the bathroom with high frequency of use, once the decoration is missed, it will inevitably lead to secondary decoration. It is a small matter to make a wall, and even need to move the floor. Just think about it. Then be wary of missing bathroom decoration, so that no regrets.
1. Be careful not to damage the original waterproof layer when renovating hydropower
Generally speaking, as long as the new owner of the decoration owner has passed the quality inspection, it has already made a waterproof layer, but many decoration owners will transform the layout of the bathroom and the water supply and drainage pipeline when the hydropower transformation is carried out. Therefore, consumers must supervise the construction. Emphasize to the decoration workers not to damage the original waterproof layer. If it is forced to destroy the original waterproof layer, it must be repaired in time, or even redo waterproofing to ensure that no leakage will occur.
2, choose the positive solution of waterproof material
The waterproof material recommended by the Ministry of Construction is a one-component environmentally-friendly polyurethane coating, mainly because it can tightly enclose the pipe and the ground, penetrate into the gap, and does not shrink after drying. It is more suitable than rigid materials such as waterproof cement. In the bathroom, there are many small-sized houses with many pipes and gaps. The cost of this kind of paint per square meter is about 50~60 yuan, which is the price that the general decoration owners can bear.
3, can not paint waterproof material in rainy days
In order to have a good waterproof effect, the waterproof coating must be painted three times. The dry period of the one-component environmentally-friendly polyurethane coating is about 3~4 days. If the waterproof material is applied in the rainy day, the effect of the waterproof coating is Not very good.
4, do a good job of ground waterproofing
Before paving the floor tiles, it is necessary to do a waterproof project; after the tiles are laid, it is necessary to ensure that the brick surface has a water discharge slope (generally about 1%), and the slope faces the floor drain, which is beneficial to wastewater discharge.
5, do a good wall waterproof
When the bathroom is bathed, it will splash water to the adjacent wall. If there is no waterproof layer protection, the partition wall and the opposite corner wall will be mild and mildewed. Therefore, it is necessary to make the wall waterproof before the wall tile is applied. Generally, the wall surface should be waterproofed to 30 cm in height, but the non-load-bearing light wall should be waterproof. At least To be 1.8 meters high.
6, must do waterproof inspection
After the waterproofing project is finished, in order to be safe, it is still necessary to do waterproof inspection. If the waterproof inspection is unqualified, it must not be made. The construction team should redo the waterproof project. If there are conditions, you can ask the professional decoration person to help supervise the waterproof project. Going on.
Concerned about surprises
Label: Vigilance, bathroom decoration, missing decoration, three things, not to be missed
Previous: The advantages of real stone paint and its future market value Next: Furniture loves to play "environmental protection" card purchase more need to "anti-flicker
Shandong Buluoer Intelligent Technology Co., Ltd. has carved a remarkable niche in the market for manufacturing, wholesaling, importing, exporting and retailing a high-quality range of Welding Accessories. Offered products range consists of Plasma Cutting Machines, Manual Metal ARC Welding Transformers and Welding Machines. Our complete product range is manufactured under the supervision of trained personnel who use the utmost quality raw material. The offered range is largely used for welding purposes in many industries like automobile, construction, pressure vessels, and earth moving equipment, pre-engineered building, and others.
Being a client oriented firm, we offer products as per client need. In addition to this, we have incorporated advanced methods of production, which have enabled us staying on pace with the rising industrial challenges. Also, we have a long list of clients.
Cutting samples
Plate Cutting Machine,Gantry Plasma Cutting Machine,Gantry Cutting Machine,Plate Plasma Cutting Machine
Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com