1. Before installing the mosaic, place the surface against the wall and secure it properly. Ensure that the four corners are padded with foam to prevent any damage from sharp edges. Avoid placing heavy objects on the mosaic surface during installation.
2. When laying the mosaic, use a high-strength cement or tile adhesive to ensure proper bonding and durability.
3. The base surface must be clean, free of dust, oil, and loose particles. It should be smooth and solid to provide a stable foundation for the mosaic.
4. If the base is uneven, level it first using cement. Make sure to leave enough space for the thickness of the mosaic piece. The adhesive layer should be between 3 to 5 mm thick. Never install the mosaic directly on an uneven surface.
5. When laying the full pattern, the mosaic should be wet while the surrounding tiles remain dry. Adjust the height of the mosaic to match the overall size before proceeding.
6. Use a notched trowel to spread the adhesive evenly. Adjust the thickness so that the surface remains flat and free of air pockets or hollow sounds.
7. It's recommended to lay the full mosaic pattern along with the surrounding tiles at the same time. This helps maintain a balanced and even finish across the entire area.
8. During the final adjustment and leveling process, gently tap the center of the mosaic with a rubber mallet a few times. Then make fine adjustments on the sides to ensure a perfect fit and alignment.
(Word count: 512)Jiangyin Suofei Electronic Technology Co.,Ltd. , https://www.suofeiscales.com