| The first lecture, the basic knowledge of safe production, what is safe production, what is its significance? ☞ Safe production: refers to the improvement of working conditions, the prevention of unsafe factors and the prevention of accidents in the process of labor production, so that the production of enterprises can be carried out smoothly under the premise of ensuring the safety and health of workers and the safety of national property and people's lives and property. .包括 Includes two aspects of safety: 1. Personal safety. (including the workers themselves and related personnel) 2, equipment safety. Safety production work: A series of activities carried out to improve safety production.    What is the policy of safe production in China? Safety first, prevention-oriented, comprehensive management. The main duties of employee safety production: 1. Obey the regulations on equipment maintenance and repair system; 2. Conscientiously abide by safety production rules and regulations and labor discipline; 3. Care and use machinery and tools correctly, wear protective equipment correctly; 4. Care for safety In the case of production, the relevant leaders or departments shall be given reasonable suggestions; 5. The hidden dangers and unsafe factors of accidents shall be reported to the organization or relevant departments in a timely manner; 6. In the event of a work-related accident, the wounded shall be rescued in time, the site shall be protected, the report shall be reported, and the investigation shall be assisted. 7. Work hard to learn and master safety knowledge and skills, master the operating procedures and safe operating procedures of this type of work; 8. Actively participate in various safety activities, firmly establish the "safety first" thinking and self-protection awareness; Rejecting illegal command and forcing risky operations is responsible for personal safety production.     The second lecture, basic rights and obligations, your right to production safety, the right to receive safety knowledge training before taking up the post 2, the right to know and the right to work safely, the right to critique of security management, the right to report, the right to sue, the refusal of illegal command and Forcing the right to take risks. 5. Stop the operation and evacuate in an emergency. 6. Enjoy the right to work injury insurance and casualty compensation    Your safety production obligations éµ Obey the rules, obey the management ☞ Correctly wear and use labor protection products å‚åŠ Participate in training, master safety production skills ☞ Report accidents in a timely manner Lecture 3, safety knowledge    Common sense 1, "three treasures" of safe production: helmets, safety belts, safety nets 2, four do not hurt: that is, they do not hurt themselves, they do not hurt others, they are not hurt by others, protect others from being harmed 3, three violations : illegal operation, illegal command, violation of labor discipline 4, three no: no violation of the rules, no hidden dangers in the post, no accidents in the team 5, three levels of safety education: the new admission personnel must pass the project department level, the operation team level and the team Level safety education and passing the examination can only be used for work 6 and 3. At the same time, safety and sanitation facilities must be designed, constructed and put into use at the same time as the main project. 7. The principle of “four unhappiness†for handling accidents in safety production: that is, the cause of the accident has not been cleared, the person responsible for the accident has not been seriously dealt with, the employees have not been educated, and the protective measures have not been implemented. Let go. 8. In the production, we must achieve “five simultaneousâ€: that is, we must plan, arrange, inspect, summarize, and evaluate safety work while planning, arranging, inspecting, summarizing, and appraising production. Six disciplines for safe production 1. When entering the scene, you must wear a safety helmet, buckle the buckle, and use labor protection products correctly. 2. If the height is more than two meters, the safety belt should be worn and the safety hook must be fastened. 3. When working at heights, it is not allowed to throw materials and tools into the following. 4. All kinds of electromechanical equipment must have reliable safety grounding and lightning protection devices before they can be used. 5. Persons who do not understand electrical appliances and machinery are strictly prohibited from using and playing with mechanical and electrical equipment. 6. Non-operating personnel in the hoisting area are strictly forbidden to enter, and no one is allowed to stand under the pole. Safety production is not allowed. 1. Do not wear helmets and are not allowed to enter the construction site. 2, high-altitude operations do not hang safety nets, do not wear seat belts, construction is not allowed. 3, wearing high heels, slippers, bare feet are not allowed to work. 4, work time is not allowed to drink alcohol, not allowed to work after drinking. 5. The materials used in aerial work are not allowed to be thrown away. 6, the power switch is not allowed to use a gate. 7, mechanical equipment is not allowed to run with disease. 8. The safety protection device of mechanical equipment is not perfect and is not allowed to be used. 9. The crane is unmanned and can't see the lifting point. 10. No smoking is allowed in the fireproof restricted area. Wear protective equipment correctly The fourth lecture, understanding the safety signs of safety signs in China The security color is a color used to express the meaning of security information such as prohibitions, warnings, instructions, and prompts. Its role is to enable people to quickly identify and distinguish safety signs, to remind people to pay attention to safety and prevent accidents. China's safety color standards stipulate that the four colors of red, yellow, blue and green are safe colors. At the same time, it is stipulated that the safety color must be kept within a certain color range, and it cannot be discolored, discolored or contaminated, so as to avoid confusion with other colors and misidentification.    The definition of safe color is red: it is very eye-catching, making people excitable and irritating psychologically. The red light and light wave is long, it is not easy to be scattered by dust and fog, and it is easy to identify in far away places, that is to say, red attention. High, visibility is also very good. Therefore, it is used to indicate danger, prohibition, and stop. Used to prohibit signs. The emergency stop handles or buttons on the machine and the parts that are prohibited from being touched are usually red, sometimes indicating fire. Indigo: Blue's attention and visibility are not very good, but it works well with white, especially under the sun. Therefore, the color selected as the instruction mark must be observed. ☞ Yellow: The stripes formed with black are the most visible colors, which are particularly inspiring, so they are chosen as warning colors, meaning warnings and attention. Such as dangerous machines and cordon in the factory, lane center line, helmets, etc. ☞Green: Although attention and visibility are too high, green is a symbol of freshness, youth, and youth. It has the psychological effects of peace, forever, growth, safety, etc., so green reminds safety information, meaning is a reminder, indicating a safe state or Can pass. The safety passages in the workshop, the pedestrian and vehicle access signs, the location of fire fighting equipment and other safety equipment are all green. Important tips for safety signs  Safety signs are made up of safe colors, geometric figures and graphic symbols. It is divided into four categories: prohibition signs, warning signs, command signs, and warning signs.    Lecture 5, major hazards and countermeasures Main countermeasures for landslide landslide: åŠæ—¶Adjust the excavation slope ratio according to soil conditions, slow down the slope ratio of the slope to a stable state, timely repair the slope, observe the regular slope, and stop at the dangerous section. Pay attention to the slope collapse sign. Be sure to wear helmets for safe use of electricity. Main measures: ☞ Non-electrical appliances are strictly prohibited. All electrical appliances should be checked for leakage and grounding before use. All electrical appliances must pass through the leakage protector, and the leakage protector must be sensitive and reliable. ☞We should use high-quality cable. It is forbidden to use glue thread. It is forbidden to bundle cable and wire with conductive materials such as wire. All power switches should be marked with the purpose and responsible person. ☞ Learn electric shock first aid knowledge The main countermeasures for vehicle damage: 施工 The construction department of the project department is close to the county town and national highway. Traffic safety is especially important. Compliance with traffic rules ☞ vehicle safety facilities are in good condition. When the lights are complete, many people should walk in a column and should not be arranged in a row. ☞Commuting vehicles should not be mixed with people, no over-the-counter, no speeding [size=1em] mechanical injury The main countermeasures: ☞ strictly in accordance with the operating procedures, on-time mechanical maintenance, pre-work inspection should be in place, all kinds of protective facilities are complete and reliable, especially the outer protective cover of the generator transmission part, the handle switch of the cutting machine, etc. It is strictly forbidden to wear gloves when rotating parts and equipment, and it is strictly forbidden to pass through the clothes of the fertilizer. Do not stay in the radius of the excavator. Do not use backhoes or loaders. Lifting damage The main countermeasures: ☞ All kinds of lifting equipment must be inspected before installation, and all kinds of documents are complete. ☞ Lifting equipment must be specially inspected before use. ☞ Crane operators and lifting commanders must be certified to work after special training. ☞Wire ropes and slings should be inspected every shift. Before the crane starts, it should be confirmed to be safe before driving. No one should stay under the lifting hoist. The crane driver should follow the parking signal from anyone. It is strictly forbidden to mix people and people in the cage Object blow Falling from a height Work at heights: Any work carried out at a height where the fall height is more than 2m and is likely to fall is called high work. It is divided into one level high work: 2-5M; second level, 5-15M; third level, 15-30M; fourth grade, 30M or more. The main countermeasures: ☞ 1, first of all should do a good job of safety protection facilities, such as setting up safety fences, paving springboards, hanging safety nets, etc. 2. When the above facilities are imperfect, safety belts should be attached. The correct system should be high and low. ☞ 3, the body should meet the requirements, people with high blood pressure, low blood sugar, epilepsy and other non-indications are strictly prohibited from working on the elevated. Fire disaster How to do safety protection in high work (1) Wear protective equipment as required. Such as wearing soft-soled shoes, wearing a safety helmet, wearing a seat belt; seat belts should be high hanging low, can not wear shoes or plastic hard bottom shoes. (2) It is forbidden to use ladders without slip or ladder defects when climbing. The top of the ladder should be placed firmly or with a special escalator. (3) The scaffolding used for ascending should comply with the regulations. Before use, check for broken flaws. The balance must be balanced and secure. The two ladders should be fastened with ropes. (4) Pay attention to whether the scaffold is strong, strong and balanced. Floors must be placed on each floor, and the upper and lower legs should have good handrails to ensure safety. (5) A safety net must be provided below the high work. For the construction without external frame protection, a fixed safety net must be set at 4-6 meters, and a fixed safety net should be set every 12 meters (four floors), and at the same time, one layer rises with the wall. Safety net. (6) Before operating or walking on the ceiling and light roof, a springboard must be placed on top or a safety net must be placed underneath. (7) When working in high places in cold areas in winter, it is necessary to prevent the ice from slipping and not to pour water on the aisles and scaffolding. (8) When there is a lightning strike or a cloud in the high place, there will be heavy thunderstorms, and the workers on the scaffolding must leave immediately.    Lecture 6, on-site first aid knowledge    Accidental injury First aid 1. When encountering accidental injury, do not panic, keep calm, and maintain order at the scene. 2. Under the condition that the surrounding environment is not endangered, it is generally not easy to move the casually. 3. Don't drink any drinks or food for the wounded and sick. 4. If an accident occurs and there is no one on the scene, you should call out to the surrounding area and ask the person to help or try to contact the relevant department. Do not leave the wounded and sick alone. 5. Immediately report the scene of the accident, the number of wounded and sick, the injury and illness, and the treatment of injuries and injuries to the relevant departments. 6, according to the injury to the patient classification and rescue, first heavy and then light, first rush, then slow, first and then far. 7. Rapidly perform artificial rescue for wounded and sick people who suffer from suffocation and difficulty breathing. 8. For those who have a stable injury, quickly transfer to the nearest hospital. 9. On-site rescue must be subject to leadership and must not be independent. The most important thing for electric shock emergency first aid is to move quickly. Quickly and correctly remove the electric shock from the power source and quickly and correctly provide first aid. To fight for time is to fight for life. The main ambulance methods for electric shock emergency site applications are artificial respiration and extrathoracic heart compression. Artificial respiration is the best effect of mouth-to-mouth resuscitation by artificial respiration. Pinch the nostril of the electric shocker, take a deep breath and then blow it against the mouth of the electric shocker. The time is about 2 seconds. After the air blows, immediately leave the electric shocker's mouth and release the electrician's nostrils. He exhales on his own, about 3 seconds, about 12 times per minute. The external chest compression method rescuer squats on the side of the electric shocker or rides on both sides of the waist, and the two hands overlap. The root of the palm is placed above the heart of the injured person, under the sternum, and the palm root is pressed vertically downwards. The blood inside the heart is quickly released after being squeezed, the chest is automatically restored, and the blood is filled with the heart, at a rate of 60 beats per minute. Once breathing and heartbeat are stopped, mouth-to-mouth resuscitation and chest compression should be performed at the same time. If only one person is rescued at the scene, it can be used alternately in two ways, each blowing 2 to 3 times, and then squeezing 10-15 times. . The rescue must be carried out continuously, and must not be rashly terminated. The rescue cannot be terminated during the transportation. Heatstroke emergency heatstroke is an acute disease caused by high temperature and sun exposure. After heatstroke, there will be symptoms such as dizziness, headache, general weakness, thirst, palpitations, nausea, vomiting, and sudden fainting in severe cases. Heat stroke can be divided into threatened heat stroke, mild heat stroke and severe heat stroke. The method of heatstroke first aid is to let the heatstroke patient immediately leave the high temperature environment, transfer to a cool and ventilated place to rest, and untie the clothes, in a supine position, while allowing the patient to drink more salty drinks. For people with aura of heatstroke, no special treatment can be done to make him return to normal. For patients with severe heat stroke, they should be immediately sent to hospital for treatment. First aid for sputum injury 1. Immediately dig up the wounded, be careful not to be injured again, the movement should be light, accurate, fast, do not force pull. If all are buried, the injured person's head should be exposed as soon as possible, clean the nose and nose soil, sandstone, blood clots, loosen the belt to facilitate breathing. 2. Keep the casualty lying flat and head to one side, preventing vomiting from clogging. 3. When the wound is bleeding, use the cloth to stop bleeding and clean water to wash the wound, and wrap it with a clean towel to prevent infection. 4. Use a splint or substitute to fix the fracture. 5. Respiratory stop, mouth-to-mouth resuscitation. 6. Heartbeat stop, perform chest chest compressions. 7. Handle the wounded to be stable and avoid bumps and distortions. Blood transfusion and infusion as soon as possible. Falling first aid at high altitude 1. Remove the utensils and the hard objects in the pockets. 2. During the handling and transfer process, the neck and torso should not be flexed or twisted, but the spine should be straightened. It is absolutely forbidden to lift one leg and lift the leg to avoid or increase the paraplegia. 3, the wound is properly bandaged, but patients with suspected skull base fractures and cerebrospinal fluid leakage should not be stuffed to avoid intracranial infection. 4, the maxillofacial wounded should first keep the respiratory tract unobstructed, loosen the wounded neck and chest buttons. 5, the composite injury requires flat supine position, keep the airway unblocked, untie the collar buckle. 6, around the vascular injury, compression of the upper part of the injured artery to the bones. It is effective to place a thick dressing directly on the wound, and the bandage is pressure-wrapped so as not to bleed and not affect the blood circulation of the limb. 7, quickly and smoothly sent to the hospital for treatment. Fire first aid to a new place should be familiar with the environment, know the safe passage and fire facilities. Don't panic after the fire, the alarm and fire fighting, self-rescue should be carried out at the same time. If it is the initial fire, separate the fire source and use the fire extinguisher or wet blanket to protect the fire; if the fire is too big or the fire is not in your house, if the door is hot It means that the outdoor is already a sea of ​​fire. Don't rush to open the door. Don't jump off the building. If the situation is urgent, you can tear the sheets and clothes into a strip and then slip off the window, or let the water wet the walls and doors to prevent the fire from spreading. The bathroom is the best place to survive. It is not possible to delay time due to cleaning up luggage and valuables. You can't walk upright when the smoke is full. After the fire is ignited with heavy smoke, it should crawl on the ground to avoid smoke and poisoning. Wear shoes on the ground. If you are on fire, don't run, take off your clothes, or lie on the ground and roll the flames out. Drowning first aid, such as ropes, planks or other objects that are not easy to sink, can be thrown to the drowning person and then dragged ashore; if the swimming technique is better, it can quickly wrap around the back, grab the hair or clip the armpit, and backstroke The way to save the drowning water out of the water. After saving to the ground, immediately lay it down, untie the belt, and remove the weeds at the nose and mouth to ensure a smooth airway. Timely water control is also important. The rescuer has one leg and one half, and the drowning person's head is facing down, the belly is attached to his lap, and the water in the lungs and stomach is discharged; or the drowning person is placed on the shoulder, and the abdomen is placed on the shoulder of the rescuer. Walking and controlling water can also play artificial respiration to a certain extent. The water control time should not be too long, especially when the water control effect is not obvious, you should take the time to take other first aid measures. For example, artificial respiration on the one hand and chest compression on the other hand, the two are coordinated (ie, an average blow, press the heart 4 to 5 times), preferably coordinated by two people. If the drowning person's teeth are tightly bitten, the artificial breathing method can be changed from mouth-mouth to mouth-nose, but whatever method is adopted, it should be sustained for a long time. Because quite a few drowning people are in a "fake death" state at this time, the hope of being saved is still great. The above rescue should be carried out on the spot to avoid delays in sending to the hospital. At the same time, contact with the doctor should be made as soon as possible. Doctors will use cardiotonic and respiratory stimulants as appropriate during the rescue process, which is often helpful in correcting respiratory and circulatory failure as soon as possible. |
corn wet milling process, after germ gluten, starch are separated, the fiber is separated out, dosed with some corn slurry, then dried through revolving barrel contacting methed.It contains starch, cellulose and other oligossachride, meanwhile it have rich dissolvable protein and its degradable substance, such as peptide hormone, various amino acid and so on. Besides, it contains lactic acid, phytin salt, dissolving sugar, all these constitute a nutritional products.
It is good feed for phytophage livestock (cattle, sheep, and fish), also good for pig, chicken and other single stomach animals. 3-5% dosage in feed could provide the nutrition factors the animal need, but also promote the health of digesting system.
Corn Gluten Feed (CGF)
Corn Gluten Feed,Corn Gluten Feed For Pig Feed,Cgf 18 For Pig Feed,Con Gluten Feed 18
MIDI FEED BIOTECH LIMITED , https://www.chinabromine.com