The friends who are decorating now have good economic conditions, and the materials used for decoration and decoration are all good. The veneer is one of the materials. How much do friends know about this veneer? Our decoration home network is now available. I would like to tell you about the advantages of this veneer and what buying techniques we should learn when purchasing, and what are the steps for using the veneer.
First, the panel selection skills
1. Recognize the difference between the artificial veneer veneer and the natural wood veneer veneer: the former texture is basically straight texture, the texture pattern has rules; while the latter is natural wood pattern, the texture pattern has natural variability and is irregular.
2, good decoration: the appearance of the decorative board should have a good aesthetic, the material is fine and uniform, the color is clear, the wood grain is beautiful. The texture of the matching board and the parquet should be arranged according to a certain regularity, the wood color is similar, and the seam is almost parallel to the edge of the board.
3, the surface should be no obvious defects: the surface of the selected decorative board should be smooth, no burrs, hook marks and planing knife marks; there should be no penetration phenomenon (such as local blackening, yellowing phenomenon); should try to select the surface without cracks, cracks, No skin, resin capsule and gum road; the natural warpage of the whole board should be as small as possible to avoid the sand penetration phenomenon caused by the improper operation of the sanding process.
4, the rubber layer structure is stable, no open glue phenomenon: should pay attention to the surface between the veneer and the substrate, the inner layer of the substrate can not appear bulging, stratification phenomenon.
5. Glue test for gluing strength: This method is the most intuitive method for testing gluing strength. Use a sharp flat blade to split along the glue layer. If the rubber layer is cracked and the wood is broken, the glue strength is poor.
6, to choose a low formaldehyde release plate: choose to avoid the scent of decorative panels. Because the greater the odor, the higher the amount of formaldehyde released, the more serious the pollution, the greater the harm.
7. Choose products with clear production enterprises: Most products with clear factory names, sites, and trademarks are relatively reliable.
Second, the use of the panel
1. Paste tile: Paste should be done from top to bottom. After the measures are taken by the high-rise buildings, they can be carried out in stages. The tiles in each segment or block are inlaid from bottom to top. From the position of the bottom layer of the brick under the skin, first stabilize the ruler to support the first leather tile. In the back of the tile should be 1:0.2:2 = cement: white plaster: sand mixed mortar inlay, mortar thickness is 6-1Omm, after tapping with a gray shovel handle gently tapping, make it attached, and then use steel The blade is opened to adjust the vertical seam, and the flat point is used to adjust the plane and verticality through the standard point.
2, the base layer treatment: the concrete protruding from the wall surface is flattened, the concrete wall surface of the large steel mold construction should be chiseled, and brushed with a wire brush once, cleaned, then watered and wet, followed by the alkali water The liquid is washed and dried, and then the cement mortar is mixed with 20% of the interface agent glue, and the mortar is rubbed onto the wall with the answer. The smashing point is evenly distributed, and the final setting is followed by watering and curing until the cement pulp is all. Stick to the glossy surface of the concrete and have a high strength (not recognized by hand).
3, hanging vertical, set square, find rules, ash cake, ribs: high-rise buildings should be straight lined with theodolite at the four corners and door window; multi-storey buildings, can be used from the top floor with special large The line is stretched with a low-carbon steel wire hanging vertically, and then layered according to the size of the tile, and the gray cake is placed on the side of the corner. When each layer is primed, the gray cake should be used as a reference point to make the bottom layer ash horizontal and vertical. At the same time, pay attention to find the flow gradient and drip line (slot) of the decorative surface, waist line, window sill, awning and other finishes.
The veneer introduced in our article has a lot of shopping tips, friends can refer to a lot of reference, some of the use of the veneer friends have learned. Our decoration home network also prepared a lot of decoration information for everyone, friends can pay more attention to and understand some knowledge about your decoration.
More related wonderful reading:
Melamine veneer advantages melamine veneer maintenance method
How to apply the veneer? Veneer construction process
Maijin Aluminum Oxide Coating SPC Flooring is today's hardest flooring, the revolutionary progress of the materials, making it the most suitable for commercial use of flooring materials.It integrates the advantage of wood flooring and ceramic tile at a suit -- warmth, comfortable, waterproof, wear-resistant, anti-oxidation, easy to install and other characteristics.
Aluminum Oxide Coating Spc Flooring
Aluminum Oxide Flooring,Suitwarmth Spc Flooring,Aluminum Oxide Coating Flooring,Spc Aluminum Oxide Coating Flooring
Dalian Huimingmaijin New Materials Co.,Ltd , https://www.maijinfloor.com