The mahogany furniture is durable and durable because of its wood, but these high-grade furniture made of precious precious wood should be used reasonably and properly maintained to prolong its service life, and inherit the style of Ming and Qing classical furniture. The furniture made of mahogany wood is more and more popular, so many people regard mahogany furniture as a collection for collection. Combining the suggestions of many experts and the maintenance experience of collectors, the practical maintenance methods of mahogany furniture are listed:
First, keep the furniture clean and tidy, and use a clean gauze to wipe off dust every day. It is not advisable to use chemical brighteners to avoid damage to the paint film. In order to maintain the brightness of the furniture paint film, the walnuts can be crushed and peeled, and then polished with three layers of gauze.
Secondly, mahogany furniture is generally used for a long period of time, so it is usually necessary to protect the surface coating of the furniture. It is best to wipe it with a little wax every three months, which not only increases the beauty of the furniture, but also protects the wood.
Third, the mahogany furniture must be stored in moderation. Store items in the cabinet not to exceed the door frame. If you often squeeze hard plugs, it will cause deformation of the cabinet door. The doors and drawers of the furniture shall avoid deformation due to compression caused by clothing.
Fourth, the mahogany furniture should not be dried. Therefore, the mahogany furniture should not be exposed to direct sunlight. Do not place the furniture directly in high-temperature places such as heating stoves, fireplaces, etc .; place it indoors away from doors, windows, air vents, etc. with strong air flow Do not blow the air conditioner towards the furniture.
Fifth, in order to protect the paint film from scratches and to show the wood texture, thick glass plates are generally placed on the countertops, and small suction pads are used to separate the glass plates from the wooden countertops. It is recommended not to use transparent polyethylene crystal plates.
Sixth, the placement and use must be square, the force direction of the furniture legs and feet should be consistent with gravity, do not tilt, you can use foot pads to adjust.
Seventh, prevent the overturning of solvents such as alcohol and banana water. Otherwise, it will cause "scars" on the surface of the furniture. When the furniture surface is stained with dirt, it should be washed with mild soapy water. After drying, it should be waxed again to restore the original appearance. However, it must not be wiped with solvent liquids such as gasoline, kerosene, turpentine, etc. Paint and lacquer gloss.
Eighth, when handling or moving furniture, it should be handled lightly, not pulled hard, so as not to damage the tenon and mortise structure, resulting in the loosening of the overall structure of the furniture. Tables and chairs cannot be lifted up and fall off easily. They should be lifted from both sides of the table and under the chair surface. It is best to remove the cabinet door and then lift it to reduce weight and avoid movement of the cabinet door. If you need to move particularly heavy furniture, you can use soft ropes under the furniture chassis to lift and move.
Ninth, you can simply wipe the wax (dissolve beeswax in a solvent, or melt it with moderate heating) to maintain furniture, especially the back of the furniture. Pay attention to less quantity and fewer times, only wipe the back and bottom of the furniture, not the front, and close the moisture of the furniture appropriately.
Tenth, walnut oil used to maintain furniture is only suitable for unpainted and waxed furniture. The frequency of use should not be too high. In general, it can be used once every 2 to 3 months. In a relatively dry environment, the maintenance interval can be shortened properly, and the maintenance should be performed once a month. It should also be reminded that although walnut oil can be "dried", it is necessary to pay attention to the amount of use when it is used normally. The oil has the characteristics of vacuuming. If the amount is too large, the dust will adhere and produce a greasy feeling.
Eleventh, dust is actually a kind of abrasive particles. When wiping the dust, use a soft cotton cloth to gently wipe back and forth along the wood grain. If you use a hard and dry cloth to wipe the paint surface, it will cause the paint surface to wear off and make it tarnished.
Twelfth, it can be rubbed and wrapped with antique man cloth (it is best not to use chemical fiber cloth) wrapped with walnut kernels, and the effect is also very good.
Shaft sleeves are applied in order to protect the shaft respectively the running surface of the shaft seal from damage or abrasive wear.
Shaft sleeves or tube fittings we made are mostly sold to North America, Europe, Japan, etc.
OD Dimensions from 1" to 16"
Precision: +/- 0.0005"
Material: carbon steel, grey iron, ductile iron, aluminum, stainless steel
Surface treatment: blackening, zinc plating, powder coating, painting, oiled, etc.
All of our cooperators are large bearing companies, mower companies or agricultural equipment companies.
Because of the long term cooperation, we could supply our customers not only the products but also our recommendation on the designs to saving costs.
To meet your demand, we are a manufacturer, also we are a designer.
Micro Shaft Sleeve,Bearing Shaft Sleeve,Tube Elbow Fitting,Stainless Steel Tube Fittings
SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com